-
Interface DI-12LH for connection between Hamplus remote control MBD-8g or MBD-12F with -
- Automatic Antenna Switch with 6 antennas by 1 radio
- DC to 450 MHz operation
- RS-232 Com
- Inteligent band decoder and antenna memory.
- Cabinet painted in the black color, having UHF type (SO-239) connections and DC 13.8v.
- All antennas and radio are switched to ground when not in use.
- Automatic operation compatible with: ELECRAFT, KENWOOD, YAESU, ICOM, FLEX or any other Radio that uses one of these communication protocols.
- Manual operation with any radio.
-
- Controller for up to twelve antennas and eight rotors
- LAN port for remote operation
- Software updates via USB.
- Interlock system that prevents two or more radios on the same antenna
- Hot Switch Protection
- Compatible with all Hamplus antenna switch
- Suitable for use with the Hamplus antenna switch model AS-1206 or AS-86
-
- Antenna switch with 8 inputs by one output.
- DC to 450MHz operation.
- The coaxial connectors are the UHF type (SO-239) or N type.
- When the power supply are disconected, all antennas are connected to ground.
-
- Antenna Switch with 6 inputs by two output remotely controlled.
- Aluminum cabinet painted in black color, having N or UHF type (SO-239) for the R.F connections and DB-15 for remote control.
- When the power are switched off, all antenna inputs are routed to ground.
- Operation from DC to 450MHz
-
YRC-12 15P Cable for connection between Yaesu radio and Hamplus AS-601, MBD-12F, MBD-8G and MBD-62 -
YRC-12 8P Cable for connection between Yaesu FT-991 radio and Hamplus MBD-12F, MBD-8G and MBD-62 Controllers -
IRC-62-13P Cable for connection between Hamplus antenna switch AS-603VR, AS-603UR and Icom radio with 13 pin ACC conector. -
YRC-12 8P8 Cable for connection between Yaesu FT-991 radio and Hamplus MBD-12F, MBD-8G and MBD-62 Controllers -
YRC-6BCD 8PD15 Connection cable for Yaesu radios with AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR and AS-603UR Antenna Switch -
YRC-6BCD8PD Connection cable for Yaesu radios with AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR and AS-603UR Antenna Switch -
YRC-12 10P Cable for connection between Yaesu FTDX-10, FTDX-1200, FTDX-450D, FT950 radios and Hamplus MBD-12F, MBD-8G and MBD-62 Controllers -
YRC-6BCD15P Cable for connection between Hamplus antenna switch AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR and AS-603UR with Yaesu radio. -
YRC-6BCD 10P Connection cable for Yaesu radios with AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR and AS-603UR Antenna Switch -
YRC-6BCD8P Connection cable for Yaesu radios with AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR and AS-603UR Antenna Switch
-
- Impedance matching for stack up to four antennas
- Controller for two rotators
- Antenna Switch and Power Supply in the same box
- RS-232 Yaesu protocol for external rotator control
- Works with different rotators
- Wireless control
- All commands over RF cable
- Short circuit protection on RF cable
- Different array of antennas in TX and RX.
- HF operation
- Three installation options: Without the rotator power supply, with switch and rotator power supply in the same box, and with switch and rotator power supply in independent boxes.
- Works with a Controller for each Radio. Each Controller can access any of the antennas stack.
-
YRC-6BCD8P8 Connection cable for Yaesu radios with AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR and AS-603UR Antenna Switch -
YRC-6BCD 8P15 Connection cable for Yaesu radios with AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR and AS-603UR Antenna Switch
-
YRC-6BCD 10P15 Connection cable for Yaesu radios with AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR and AS-603UR Antenna Switch -
- Antenna Switch and Power Supply for two Rotators.
- Operation with Four Stack III Stack Match
-
IRC-12S Cable for connection between Icom radio and Hamplus MBD-12F, MBD-8G and MBD-62 controllers. -
IRC-6S Cable for connection between Hamplus antenna switch AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR, AS-603UR and Icom radio. -
YRC-6BCD15P15 Cable for connection between Hamplus antenna switch AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR and AS-603UR with Yaesu radio. -
- Impedance matching for stack up to four antennas
- Controller for two rotators
- RS-232 Yaesu protocol for external rotator control
- Works with different rotators
- Wireless control
- All commands over RF cable
- Short circuit protection on RF cable
- Different array of antennas in TX and RX.
- HF operation
- Three installation options: Without the rotator power supply, with switch and rotator power supply in the same box, and with switch and rotator power supply in independent boxes.
- Works with a Controller for each Radio. Each Controller can access any of the antennas stack.
