-
- Impedance matching for stack up to four antennas
- Controller for two rotators
- RS-232 Yaesu protocol for external rotator control
- Works with different rotators
- Wireless control
- All commands over RF cable
- Short circuit protection on RF cable
- Different array of antennas in TX and RX.
- HF operation
- Three installation options: Without the rotator power supply, with switch and rotator power supply in the same box, and with switch and rotator power supply in independent boxes.
- Works with a Controller for each Radio. Each Controller can access any of the antennas stack.
-
- Impedance matching for stack up to four antennas
- Controller for two rotators
- Antenna Switch and Power Supply in the same box
- RS-232 Yaesu protocol for external rotator control
- Works with different rotators
- Wireless control
- All commands over RF cable
- Short circuit protection on RF cable
- Different array of antennas in TX and RX.
- HF operation
- Three installation options: Without the rotator power supply, with switch and rotator power supply in the same box, and with switch and rotator power supply in independent boxes.
- Works with a Controller for each Radio. Each Controller can access any of the antennas stack.
-
- Smart control for up to eight antenna and four Rotator switch.
- Band pass filter drive.
- Band Data Output.
- Split Antenna Operation.
- Hot Switch Protection.
- Twenty-five Antenna Band Memory from LF to UHF
- Illuminated push button with labels.
- Automatic tuning for shortened antennas with high Q coils.
- Control with auxiliar keyboard for Waller Flag Receiving antennas manufactured by TOPBEAM.
- RS-232 port for external control by personal computer.
- Interlock system prevents more than one radio on the same antenna.
- No computer or software required (remote without PC).
- Control all Hamplus (or other) antenna switch and rotator switch.
- By using two or more MBD-8G it's possible to expand to 16 antennas or more.
-
- Intelligent control for up to two radios and six antennas with simultaneous operation.
- Memory of antennas with 22 bands that cover from 100 KHz to 450 MHz
- Two Band decoders
- Two outputs for triggering Band Pass Filters, one for each radio
- GPOs for automatic adjustment of shortened antennas with high Q coils
- Illuminated push buttons with ID tags
- RS-232 port for external control by personal computer
- LAN port for remote operation
- Software updates via USB.
- Interlock system that prevents two radios on the same antenna
- Split antenna operation, one antenna transmits and one receives
- Hot Switch Protection
- No computer or software is required (no PC)
- Compatible with all Hamplus antenna switch
- Suitable for use with the Hamplus antenna switch model AS-62
-
- Controller for up to twelve antennas and eight rotors
- LAN port for remote operation
- Software updates via USB.
- Interlock system that prevents two or more radios on the same antenna
- Hot Switch Protection
- Compatible with all Hamplus antenna switch
- Suitable for use with the Hamplus antenna switch model AS-1206 or AS-86
-
- Smart control for up to twelve Antenna and eight Rotator Switch.
- Band pass filter drive.
- Band Data Output.
- Automatic tuning for shortened antennas with high Q coils.
- Control with auxiliar keyboard for Waller Flag Receiving antennas manufactured by TOPBEAM.
- Eight rotator Switch control
- Antenna memory per Band
- Decoder with 31 bands from 100KHz to 10GHz
- GPI/O to control external equipments
- GPO Driven by frequency
- Hot Switch Protection
- Antenna Group protection to prevent another radio from using one of the antennas in the group
- No computer or software involved (PC less)
- Interlock system to prevent more then on radio at the same antenna.
- LAN for external remote control.
- Control all Hamplus (or others) antenna switch and rotator switch.
- Iluminated push buttons with labels.
- Software updates via USB.
-
- Antenna Switch with 6 inputs by two output remotely controlled.
- Aluminum cabinet painted in black color, having N or UHF type (SO-239) for the R.F connections and DB-15 for remote control.
- When the power are switched off, all antenna inputs are routed to ground.
- Operation from DC to 450MHz
-
- Antenna Switch with 6 inputs by two output remotely controlled.
- Aluminum cabinet painted in black color, having UHF type (SO-239) for the R.F connections and DB-15 for remote control.
- All antenna inputs are switched to ground when not in use.
- When the power are switched off, all antenna inputs are routed to ground for protection purposes.
-
- Antenna Switch with 8 inputs by two output remotely controlled.
- Aluminum cabinet painted in the dark gray color, having UHF type (SO-239) for the R.F connections and DB-25 for remote control.
- All antenna inputs are switched to ground when not in use.
- When the power are switched off, all antenna inputs are routed to ground for protection purposes.
-
- Antenna Switch with 12 inputs by two output remotely controlled.
- Aluminum cabinet painted in the dark gray color, having UHF type (SO-239) for the R.F connections and DB-25 for remote control.
- All antenna inputs are switched to ground when not in use.
- When the power are switched off, all antenna inputs are routed to ground for protection purposes.
-
- Antenna switch with 8 inputs by 4 output remotely controlled.
- Aluminum cabinet painted in the dark gray color, having UHF type (SO-239) for the R.F connections and DB-25 for remote control.
- All antenna inputs are switched to ground when not in use.
- When the power are switched off, all antenna inputs are routed to ground for protection purposes.
-
- Antenna Switch with 12 inputs by four output remotely controlled.
- Aluminum cabinet painted in the dark gray color, having UHF type (SO-239) for the R.F connections and DB-25 for remote control.
- All antenna inputs are switched to ground when not in use.
- When the power are switched off, all antenna inputs are routed to ground for protection purposes.
