-
Cable for connection pin to pin between Hamplus remote control MBD-62 and AS-62 Antenna Switcher, 20 meters long. -
- Connect your radio's RS-232 serial port to a PC with Logger Software and an MBD-8, MBD-12 controller or any other Hamplus automatic antenna switch.
- Applicable to Elecraft, Kenwood, Flex and other radios.
-
Interface DI-12LH for connection between Hamplus remote control MBD-8g or MBD-12F with -
Cable for connection pin to pin between Hamplus remote control MBD-8, MBD-12 and AS-82F, AS-84F, AS-86F, AS-1202F, AS-1204F, AS-1206F Antenna Switcher, 20 meters long.
-
Manual Remote Control The RC-12 ia a manual remote control unit, used to control antenna switches up to 12 antennas. It features interlock, not allowing more than one radio in the same antenna. The actuator is a rotating switch and there are LED´s indicators for confirmation. On the side of each LED you will find a white space to take a note about each antenna. Recommended for more than one radio use. -
- Antenna Switcher with 2 inputs by one output remotely controlled.
- The coaxial connectors are the UHF type (SO-239)
- Used to expand 8 to 16 antennas.
- Works with two AS-81 or others 8 ant. switch
-
- Antenna and Rotator Switch with 2 inputs by one output remotely controlled.
- Coaxial connectors UHF type (SO-239) and DB-9 for rotators.
- Used to expand 8 to 16 antennas and 4 to 8 rotators.
- The ASR-21 comutates four wires.
-
- Antenna switch with 8 inputs by one output remotely controlled.
- Aluminum cabinet painted in the white color especially developed to allow external assembly.
- The coaxial connectors are the UHF type (SO-239) or N type for remote control.
- All unused inputs are automatically connected to ground.
- When the power supply are disconected, all inputs are connected to ground.
-
- Antenna switch with 8 inputs by one output.
- DC to 450MHz operation.
- The coaxial connectors are the UHF type (SO-239) or N type.
- When the power supply are disconected, all antennas are connected to ground.
-
- Power Supply for two Rotators.
- Automatic operation with: AS-603HL, AS-603VR, AS-603UR and Four Stack III
-
- Automatic Antenna Switch with 6 antennas by 3 radios.
- Inteligent band decoder and antenna memory.
- Aluminum cabinet painted in the dark gray color, having UHF type (SO-239) connections and DC 14v.
- All antennas and radios are switched to ground when not in use.
- Non-simultaneous operation.
- Compatible with: ELECRAFT, KENWOOD, YAESU, ICOM, FLEX or any other Radio that uses one of these communication protocols.
- Manual operation compatible with any radio.
-
- Smart control for up to eight antenna and four Rotator switch.
- Band pass filter drive.
- Band Data Output.
- Split Antenna Operation.
- Hot Switch Protection.
- Twenty-five Antenna Band Memory from LF to UHF
- Illuminated push button with labels.
- Automatic tuning for shortened antennas with high Q coils.
- Control with auxiliar keyboard for Waller Flag Receiving antennas manufactured by TOPBEAM.
- RS-232 port for external control by personal computer.
- Interlock system prevents more than one radio on the same antenna.
- No computer or software required (remote without PC).
- Control all Hamplus (or other) antenna switch and rotator switch.
- By using two or more MBD-8G it's possible to expand to 16 antennas or more.
