-
- Impedance matching for stack up to four antennas
- Controller for two rotators
- RS-232 Yaesu protocol for external rotator control
- Works with different rotators
- Wireless control
- All commands over RF cable
- Short circuit protection on RF cable
- Different array of antennas in TX and RX.
- HF operation
- Three installation options: Without the rotator power supply, with switch and rotator power supply in the same box, and with switch and rotator power supply in independent boxes.
- Works with a Controller for each Radio. Each Controller can access any of the antennas stack.
-
- Impedance matching for stack up to four antennas
- Controller for two rotators
- Antenna Switch and Power Supply in the same box
- RS-232 Yaesu protocol for external rotator control
- Works with different rotators
- Wireless control
- All commands over RF cable
- Short circuit protection on RF cable
- Different array of antennas in TX and RX.
- HF operation
- Three installation options: Without the rotator power supply, with switch and rotator power supply in the same box, and with switch and rotator power supply in independent boxes.
- Works with a Controller for each Radio. Each Controller can access any of the antennas stack.
-
- Smart control for up to eight antenna and four Rotator switch.
- Band pass filter drive.
- Band Data Output.
- Split Antenna Operation.
- Hot Switch Protection.
- Twenty-five Antenna Band Memory from LF to UHF
- Illuminated push button with labels.
- Automatic tuning for shortened antennas with high Q coils.
- Control with auxiliar keyboard for Waller Flag Receiving antennas manufactured by TOPBEAM.
- RS-232 port for external control by personal computer.
- Interlock system prevents more than one radio on the same antenna.
- No computer or software required (remote without PC).
- Control all Hamplus (or other) antenna switch and rotator switch.
- By using two or more MBD-8G it's possible to expand to 16 antennas or more.
-
- Intelligent control for up to two radios and six antennas with simultaneous operation.
- Memory of antennas with 22 bands that cover from 100 KHz to 450 MHz
- Two Band decoders
- Two outputs for triggering Band Pass Filters, one for each radio
- GPOs for automatic adjustment of shortened antennas with high Q coils
- Illuminated push buttons with ID tags
- RS-232 port for external control by personal computer
- LAN port for remote operation
- Software updates via USB.
- Interlock system that prevents two radios on the same antenna
- Split antenna operation, one antenna transmits and one receives
- Hot Switch Protection
- No computer or software is required (no PC)
- Compatible with all Hamplus antenna switch
- Suitable for use with the Hamplus antenna switch model AS-62
-
- Controller for up to twelve antennas and eight rotors
- LAN port for remote operation
- Software updates via USB.
- Interlock system that prevents two or more radios on the same antenna
- Hot Switch Protection
- Compatible with all Hamplus antenna switch
- Suitable for use with the Hamplus antenna switch model AS-1206 or AS-86
-
- Smart control for up to twelve Antenna and eight Rotator Switch.
- Band pass filter drive.
- Band Data Output.
- Automatic tuning for shortened antennas with high Q coils.
- Control with auxiliar keyboard for Waller Flag Receiving antennas manufactured by TOPBEAM.
- Eight rotator Switch control
- Antenna memory per Band
- Decoder with 31 bands from 100KHz to 10GHz
- GPI/O to control external equipments
- GPO Driven by frequency
- Hot Switch Protection
- Antenna Group protection to prevent another radio from using one of the antennas in the group
- No computer or software involved (PC less)
- Interlock system to prevent more then on radio at the same antenna.
- LAN for external remote control.
- Control all Hamplus (or others) antenna switch and rotator switch.
- Iluminated push buttons with labels.
- Software updates via USB.
-
- Antenna Switch with 6 inputs by two output remotely controlled.
- Aluminum cabinet painted in black color, having N or UHF type (SO-239) for the R.F connections and DB-15 for remote control.
- When the power are switched off, all antenna inputs are routed to ground.
- Operation from DC to 450MHz
-
- Antenna Switch with 6 inputs by two output remotely controlled.
- Aluminum cabinet painted in black color, having UHF type (SO-239) for the R.F connections and DB-15 for remote control.
- All antenna inputs are switched to ground when not in use.
- When the power are switched off, all antenna inputs are routed to ground for protection purposes.
-
- Antenna Switch with 8 inputs by two output remotely controlled.
- Aluminum cabinet painted in the dark gray color, having UHF type (SO-239) for the R.F connections and DB-25 for remote control.
- All antenna inputs are switched to ground when not in use.
- When the power are switched off, all antenna inputs are routed to ground for protection purposes.
-
- Antenna Switch with 12 inputs by two output remotely controlled.
- Aluminum cabinet painted in the dark gray color, having UHF type (SO-239) for the R.F connections and DB-25 for remote control.
- All antenna inputs are switched to ground when not in use.
- When the power are switched off, all antenna inputs are routed to ground for protection purposes.
-
- Antenna switch with 8 inputs by 4 output remotely controlled.
- Aluminum cabinet painted in the dark gray color, having UHF type (SO-239) for the R.F connections and DB-25 for remote control.
- All antenna inputs are switched to ground when not in use.
- When the power are switched off, all antenna inputs are routed to ground for protection purposes.
-
- Antenna Switch with 12 inputs by four output remotely controlled.
- Aluminum cabinet painted in the dark gray color, having UHF type (SO-239) for the R.F connections and DB-25 for remote control.
- All antenna inputs are switched to ground when not in use.
- When the power are switched off, all antenna inputs are routed to ground for protection purposes.
-
The "Four Stack II" system from Hamplus allows one array of antennas for simultaneous operation. It is possible operate with two, three or four antennas.
For each set of antennas of the same band, two devices are used, the switch box and the remote control. -
If you have more than one radio room (Shack) and/or more than one Rotator on your directional antennas, then Rotator Switch RS-44 is the solution. With it you will use only one controller on the table and it will be able to control till four antenna rotators.- The RS-44 can select between four rotators using only one controller for each shack.
- The system can use till four controllers.
- It is possible to automate all station.
- The RS-44 comutates eight wires.
- On systems where the Hamplus MBD-8F or MBD-12F is installed, the rotator assigned to each antenna are called on each change.
- One interlock system don't permit connections for rotators in use on other shack.
-
- Automatic Remote Antenna Switch with 6 antennas by 3 radios and one linear amplifier.
- Composed by the set AS-61WL and RC-603WL
- Works from 1.8 MHz to 54 MHz
- Command and power over RF cable.
- Short circuit protection on RF cable
- RS-232 communication port.
- Inteligent band decoder and antenna memory.
- All antennas and radios are switched to ground when not in use.
- Non-simultaneous operation.
- Automatic operation compatible with: ELECRAFT, KENWOOD, YAESU, ICOM, FLEX or any other Radio that uses one of these communication protocols.
- Manual operation with any radio.
-
- Antenna switch with 8 inputs by one output remotely controlled.
- Aluminum cabinet painted in the white color especially developed to allow external assembly.
- The coaxial connectors are the UHF type (SO-239) or N type for remote control.
- All unused inputs are automatically connected to ground.
- When the power supply are disconected, all inputs are connected to ground.
-
- Antenna switch with 8 inputs by one output.
- DC to 450MHz operation.
- The coaxial connectors are the UHF type (SO-239) or N type.
- When the power supply are disconected, all antennas are connected to ground.
-
Cable for connection pin to pin between Hamplus remote control MBD-62 and AS-62 Antenna Switcher, 20 meters long. -
Cable for connection pin to pin between Hamplus remote control MBD-62 and AS-62 Antenna Switcher, 15 meters long.
-
Cable for connection pin to pin between Hamplus remote control MBD-62 and AS-62 Antenna Switcher, 5 meters long.
-
Cable for connection pin to pin between Hamplus remote control MBD-8, MBD-12 and AS-82F, AS-84F, AS-86F, AS-1202F, AS-1204F, AS-1206F Antenna Switcher, 20 meters long.
-
Cable for connection pin to pin between Hamplus remote control MBD-8, MBD-12 and AS-82F, AS-84F, AS-86F, AS-1202F, AS-1204F, AS-1206F Antenna Switcher, 15 meters long.
-
Cable for connection pin to pin between Hamplus remote control MBD-8, MBD-12 and AS-82F, AS-84F, AS-86F, AS-1202F, AS-1204F, AS-1206F Antenna Switcher, 10 meters long.
-
Cable for connection pin to pin between Hamplus remote control MBD-8, MBD-12 and AS-82F, AS-84F, AS-86F, AS-1202F, AS-1204F, AS-1206F Antenna Switcher, 5 meters long.
-
Cable for connection pin to pin between Hamplus remote control MBD-62 and AS-62 Antenna Switcher, 9 meters long.
-
Keypad -
YRC-12 10P Cable for connection between Yaesu FTDX-10, FTDX-1200, FTDX-450D, FT950 radios and Hamplus MBD-12F, MBD-8G and MBD-62 Controllers -
YRC-12 8P Cable for connection between Yaesu FT-991 radio and Hamplus MBD-12F, MBD-8G and MBD-62 Controllers -
YRC-12 8P8 Cable for connection between Yaesu FT-991 radio and Hamplus MBD-12F, MBD-8G and MBD-62 Controllers -
YRC-12 MP Cable for connection between Yaesu FTDX-101D, FTDX-101MP, FTDX-3000 radio and Hamplus MBD-12F, MBD-8G and MBD-62 Controllers -
YRC-12 15P Cable for connection between Yaesu radio and Hamplus AS-601, MBD-12F, MBD-8G and MBD-62 -
YRC-12 Cable for connection between Yaesu radio and Hamplus MBD-12F, MBD-8G and MBD-62 Controllers -
YRC-61 is a TTL to RS-232 converter cable for connection between Hamplus antenna switch and Yaesu radios compatible with model FT-847. -
Power Distributor -
YRC-8 Cable for connection between Hamplus remote control MBD-8E / F and Yaesu radio.
