-
Cable for connection pin to pin between Hamplus remote control MBD-8, MBD-12 and AS-82F, AS-84F, AS-86F, AS-1202F, AS-1204F, AS-1206F Antenna Switcher, 15 meters long. -
- Smart control for up to eight antenna and four Rotator switch.
- Band pass filter drive.
- Band Data Output.
- Split Antenna Operation.
- Hot Switch Protection.
- Twenty-five Antenna Band Memory from LF to UHF
- Illuminated push button with labels.
- Automatic tuning for shortened antennas with high Q coils.
- Control with auxiliar keyboard for Waller Flag Receiving antennas manufactured by TOPBEAM.
- RS-232 port for external control by personal computer.
- Interlock system prevents more than one radio on the same antenna.
- No computer or software required (remote without PC).
- Control all Hamplus (or other) antenna switch and rotator switch.
- By using two or more MBD-8G it's possible to expand to 16 antennas or more.
-
FRC-12 Cable for connection between Hamplus remote control MBD-8G / MBD-12F / MBD-62 and Flex radio. -
- Antenna switch with 8 inputs by 4 output remotely controlled.
- Aluminum cabinet painted in the dark gray color, having UHF type (SO-239) for the R.F connections and DB-25 for remote control.
- All antenna inputs are switched to ground when not in use.
- When the power are switched off, all antenna inputs are routed to ground for protection purposes.
-
YRC-12 10P Cable for connection between Yaesu FTDX-10, FTDX-1200, FTDX-450D, FT950 radios and Hamplus MBD-12F, MBD-8G and MBD-62 Controllers -
IRC-12-13P Cable for connection between Hamplus MBD-12F, MBD-8G, MBD-62 controllers and Icom radio with 13 pin ACC connector. -
- Smart control for up to twelve Antenna and eight Rotator Switch.
- Band pass filter drive.
- Band Data Output.
- Automatic tuning for shortened antennas with high Q coils.
- Control with auxiliar keyboard for Waller Flag Receiving antennas manufactured by TOPBEAM.
- Eight rotator Switch control
- Antenna memory per Band
- Decoder with 31 bands from 100KHz to 10GHz
- GPI/O to control external equipments
- GPO Driven by frequency
- Hot Switch Protection
- Antenna Group protection to prevent another radio from using one of the antennas in the group
- No computer or software involved (PC less)
- Interlock system to prevent more then on radio at the same antenna.
- LAN for external remote control.
- Control all Hamplus (or others) antenna switch and rotator switch.
- Iluminated push buttons with labels.
- Software updates via USB.
-
- Automatic Antenna Switch with 6 antennas by 3 radios and one linear amplifier.
- Inteligent band decoder and antenna memory.
- Aluminum cabinet painted in the dark gray color, having UHF type (SO-239) connections and DC 14v.
- All antennas and radios are switched to ground when not in use.
- Non-simultaneous operation.
- Automatic operation compatible with: ELECRAFT, KENWOOD, YAESU, ICOM, FLEX or any other Radio that uses one of these communication protocols.
- Manual operation with any radio.
-
Interface DI-12LH for connection between Hamplus remote control MBD-8g or MBD-12F with -
- Automatic Antenna Switch with 6 antennas by 1 radio
- DC to 450 MHz operation
- RS-232 Com
- Inteligent band decoder and antenna memory.
- Cabinet painted in the black color, having UHF type (SO-239) connections and DC 13.8v.
- All antennas and radio are switched to ground when not in use.
- Automatic operation compatible with: ELECRAFT, KENWOOD, YAESU, ICOM, FLEX or any other Radio that uses one of these communication protocols.
- Manual operation with any radio.
-
- Controller for up to twelve antennas and eight rotors
- LAN port for remote operation
- Software updates via USB.
- Interlock system that prevents two or more radios on the same antenna
- Hot Switch Protection
- Compatible with all Hamplus antenna switch
- Suitable for use with the Hamplus antenna switch model AS-1206 or AS-86
-
- Antenna switch with 8 inputs by one output.
- DC to 450MHz operation.
- The coaxial connectors are the UHF type (SO-239) or N type.
- When the power supply are disconected, all antennas are connected to ground.
-
- Antenna Switch with 6 inputs by two output remotely controlled.
- Aluminum cabinet painted in black color, having N or UHF type (SO-239) for the R.F connections and DB-15 for remote control.
- When the power are switched off, all antenna inputs are routed to ground.
- Operation from DC to 450MHz
-
YRC-12 15P Cable for connection between Yaesu radio and Hamplus AS-601, MBD-12F, MBD-8G and MBD-62 -
YRC-12 8P Cable for connection between Yaesu FT-991 radio and Hamplus MBD-12F, MBD-8G and MBD-62 Controllers -
IRC-62-13P Cable for connection between Hamplus antenna switch AS-603VR, AS-603UR and Icom radio with 13 pin ACC conector. -
YRC-12 8P8 Cable for connection between Yaesu FT-991 radio and Hamplus MBD-12F, MBD-8G and MBD-62 Controllers -
YRC-6BCD 8PD15 Connection cable for Yaesu radios with AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR and AS-603UR Antenna Switch -
YRC-6BCD8PD Connection cable for Yaesu radios with AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR and AS-603UR Antenna Switch -
YRC-6BCD15P Cable for connection between Hamplus antenna switch AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR and AS-603UR with Yaesu radio. -
YRC-6BCD 10P Connection cable for Yaesu radios with AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR and AS-603UR Antenna Switch -
YRC-6BCD8P Connection cable for Yaesu radios with AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR and AS-603UR Antenna Switch
-
- Impedance matching for stack up to four antennas
- Controller for two rotators
- Antenna Switch and Power Supply in the same box
- RS-232 Yaesu protocol for external rotator control
- Works with different rotators
- Wireless control
- All commands over RF cable
- Short circuit protection on RF cable
- Different array of antennas in TX and RX.
- HF operation
- Three installation options: Without the rotator power supply, with switch and rotator power supply in the same box, and with switch and rotator power supply in independent boxes.
- Works with a Controller for each Radio. Each Controller can access any of the antennas stack.
-
YRC-6BCD8P8 Connection cable for Yaesu radios with AS-603A, AS-603AL, AS-603WL, AS-603HR, AS-603VR and AS-603UR Antenna Switch
