- Automatic Antenna Switch with 6 antennas by 3 radios and one linear amplifier.
- Inteligent band decoder and antenna memory.
- Aluminum cabinet painted in the dark gray color, having UHF type (SO-239) connections and DC 14v.
- All antennas and radios are switched to ground when not in use.
- Non-simultaneous operation.
- Automatic operation compatible with: ELECRAFT, KENWOOD, YAESU, ICOM, FLEX or any other Radio that uses one of these communication protocols.
- Manual operation with any radio.
AS-603AL Automatic HF 6m Antenna Switch 6×3
US$ 433,00
Description
The AS-603AL is an automatic antenna switch for three radios and six antennas. It has internally two independent switches. One to select the radios and another to select the antennas. Each of the two internal switches have a connector on the back panel where a Linear Amplifier can be inserted. In this way the radio that is selected will go through the Amplifier. The operation is individual, which means that only the selected radio will have access to the antennas. Unused antennas are automatically grounded.
To make the operation easier, the AS-603AL also has a third internal switch that switches the Send commands and the Com port to the selected Radio.
The AS-603AL supports communication with the following radios:
Icom (CI-V), Kenwood (RS-232), Elecraft K3 (RS-232), Yaesu (RS-232), Flex Radio or any other Radio that uses one of these communication protocols.
Specification:
|
Size:
|
Width 30cm – Height 7cm – Deep 15cm |
|
Power Supply:
|
D.C. 14 Volts + or – 20% drain about 120mA |
|
Max. SSB power allowed:
|
3500 Watts PEP with S.W.R. equal or less than 1.7:1 |
|
Frequency of operation:
|
30 KHz. to 60MHz |
|
Insertion loss:
|
Equal or less than 0,2dB |
|
Port Isolation:
|
Equal or less than -72dB to 30MHz and -58db to 50MHz. |
Conection sugestion:
| Six antennas, three radios. |
Downloads:
Additional information
| Weight | 1,55 kg |
|---|---|
| Dimensions | 33 × 16 × 11 cm |
