- Automatic Remote Antenna Switch with 6 antennas by 3 radios and one linear amplifier.
- Composed by the set AS-61WL and RC-603WL
- Works from 1.8 MHz to 54 MHz
- Command and power over RF cable.
- Short circuit protection on RF cable
- RS-232 communication port.
- Inteligent band decoder and antenna memory.
- All antennas and radios are switched to ground when not in use.
- Non-simultaneous operation.
- Automatic operation compatible with: ELECRAFT, KENWOOD, YAESU, ICOM, FLEX or any other Radio that uses one of these communication protocols.
- Manual operation with any radio.
AS-603WL Automatic HF 6m Wireless Antenna Switch
US$ 582,00
Description
The AS-603WL is an automatic antenna switch for three radios and six antennas. There are two independent boxes, one for the antenna switch that is near the antennas, AS-61WL, and another box with the Push Buttons for the selection of the antennas and the Radios, RC-603WL that is next to the Radio. The connection between the two boxes is only made with the RF cable (RG-58 or RG-213). This cable takes RF, power and the necessary commands for the perfect operation of this system. The RC-603WL also allows the insertion of a linear amplifier or a wattmeter, or both. In this way the equipment will always be connected with the Radio and the antenna selected. The operation is individual, which means that only the selected radio will have access to the antennas. Unused antennas are automatically short circuited.
To facilitate the operation, the RC-601WL also has a third internal switch that switches the Send commands and the Com port to the selected Radio.
The AS-603WL supports communication with the following radios:
Icom (CI-V), Kenwood (RS-232), Elecraft K3 (RS-232), Yaesu (RS-232) or any other Radio that uses one of these communication protocols.
|
Downloads:
Additional information
| Weight | 2,4 kg |
|---|---|
| Dimensions | 32 × 30 × 14 cm |
